This video shows you how to clean the probe tip.
Firstly, you must unscrew the cap of the probe by turning it in a counterclockwise direction.
Then you can remove the probe tip by pulling the two pieces away from each other.
The best way of cleaning the probe is with dental floss.
Insert the floss into the rear of the probe, choosing the tube which has the blockage.
Pull the floss through the front of the tubing to remove any debris.
Clean each of the tubes as required.
When done, discard the floss that you used.
When placing the probe tip back into position, make sure that the holes fit into the corresponding cavities before pushing the two pieces together.
Lastly, screw the probe cap back onto the probe, fasten it with your fingers and never use tools to tighten the probe cap.
This concludes this video on how to clean the probe tip.
It is important to keep your Titan probe tubes clean. And it is easy to do. With a little care and a piece of floss you can clean out the interior of the probe in a few minutes. Make sure to follow the instructions, and to handle the interior of the probe gently.