Creating an ABRIS Test Protocol
This quick guide outlines the procedure for creating a pass/refer ABRIS test protocol. Parameters and settings should be based on an appropriate pass/refer criterion.
- Open the Titan Suite software and click on the ABRIS tab.
- Go to Menu | Setup | Protocol setup.
- Click on “New” and type the desired protocol name in the “Selected protocol” box.
- Select the desired stimulus type, stimulus intensity and rejection level from the dropdown menus.
- Set the desired test stop criteria (test time and residual noise limit).
- Select the desired test conditions (electrode montage for us, turn Bayesian weighting on or off and Enable Pass/Refer to display result labels).
- Select the desired display options for the test results and EEG.
Note: Screen-shots in this document are a guide only and are not necessarily the recommended settings for an ABRIS pass/refer protocol. Refer to the Titan Additional Information document for a more detailed description of the various criteria.
Presenter
Interacoustics
