Purpose: To evaluate the performance of the Titan Probe Unit. Solution: How to test the Pump Wheel for air leak: Switch Titan on by pressing either L or R on the handheld unit. Select Protocol “01 No…
Diagnostic probe Step 1: Unscrew the probe cap and remove the probe tip. Step 2: Make sure there is a gasket in the clean probe tip. Step 3: Replace with the clean replacement tip. Step 4: Assemble t…
This video demonstrates some suggestions to help when performing real-ear-to-coupler difference (RECD) measurements. You can read the full transcript below. Probe microphone insertion With both REMs…
Table of contents What are real-ear measurements? Why perform real-ear measurements? Contraindications to performing real-ear measurements How to perform real-ear measurements Important steps after t…
There are a number of things to consider when conducting OAE testing in order to ensure valid and reliable results. Consideration of the factors below will ensure an optimal OAE test. 1. Protocol sel…
Step 1: Unscrew the probe cap and remove the probe tip. Step 2: Thread the cleaning floss into one of the channels from the base of the probe tip. Pull the cleaning floss completely through the probe…
Step 1: Unscrew the probe cap. Step 2: Remove the probe tip. Make sure there is a gasket in the clean probe tip. Step 3: Replace with a clean/replacement tip. Step 4: Assemble the probe again (step 2…
Jack Bennett, International Clinical Trainer at the Interacoustics Academy, describes all the steps you need to take in order to prepare for Real Ear Measurements. This includes how to prepare your e…
Probe, Short Extension Cable, Preamplifier Clinical Extension Cable 1. Unscrew the probe cap. 1. Unscrew the probe cap. 2. Remove the probe tip. 2. Remove the probe tip. 3. Thread the stiff end of th…
AT235 Solutions Tympanometers The AT235 is an automatic middle ear analyzer ideal for both diagnostic and clinical evaluations. The device also includes pure tone audiometry and the Modified Hughson…
Diagnostic Probe Clinical probe Step 1: Unscrew the probe cap and remove the probe tip. Step 2: Thread the stiff end of the cleaning brush into one of the tubes from inside. Pull the cleaning floss c…
