Most people acquiring hearing aids report trouble hearing speech, or more often trouble hearing speech in noise. Here speech testing becomes a strong test tool in the assessment of the problem the patient faces. Speech audiometry employs speech signals and can be used to examine the processing ability and if it is affected by disorders of the middle ear, cochlea, auditory nerve, brainstem pathway, and auditory centers of the cortex.
There is a variety of tests available with speech testing with the basic speech audiometry being an assessment of the reception, discrimination and recognition of speech. Reception refers to the level at which the patient can hear speech is present, discrimination refers to the level at which the patient can discriminate between words, while recognition refers to the level at which the patient can recognize and recall the word.
More advanced speech testing takes into account how speech is understood in the presence of noise, with various noise types such as white noise, speech noise, babble noise, or running speech as noise source and provide information about the signal-to-noise ratio (SNR) at which the patient can understand speech. Other components such as the placement of the speech signal in relation to the noise source and the tonal differences between the speech signal and the masking signal, is some of the things incorporated into more advance speech testing.
Speech detection threshold (SDT) refers to the level at which the patient can hear speech is present in 50% of the cases.
The speech detection threshold can be used as a cross-check of the air conduction audiometry and should closely agree with the PTA (Pure Tone Average). The PTA can be calculated in different ways but is usually the average of thresholds obtained at 500, 1000, and 2000 Hz. It is generally accepted that if the PTA and the SRT is within ± 6 dB of each other the accordance is good, if it is ±7 to 12 dB it is adequate, and if it is ±13 or more, it is poor.
Note: Speech detection threshold is sometimes referred to as speech reception threshold abbreviated - SRT, not to be confused with speech recognition threshold, abbreviated - SRT. For that matter the term speech detection threshold is used and abbreviated – SDT.
The speech recognition threshold (SRT) examines at which level 50% of the speech material (usually numbers or spondaic words) is repeated correctly. In addition, SRT gives an index of the hearing sensitivity of speech and helps determine the starting point for other supra-threshold measures such as WR (Word Recognition).
The word recognition score (WR) is sometimes also referred to as SDS (speech discrimination scores) and represents the number of words correctly repeated, expressed as a percentage of correct (discrimination score) or incorrect (discrimination loss).
Pressing correct means the word is a 100% correct, while incorrect correspond with 0% correct. The score can be obtained as a phoneme score that provides information about what phonemes the patient has difficulty hearing at a particular intensity level. This is helpful for counselling and rehabilitation purposes.
In the suite. Correct: A mouse click on this button will store the word as correctly repeated. The left arrow key can also be used for storing as correct. Incorrect: A mouse click on this button will store the word as incorrectly repeated. The right arrow key can also be used to score as incorrect. Store: A mouse click on this button will store the speech threshold in the speech graph. A point can also be stored by pressing S.
On the standalone devices. Press incorrect on the keyboard to store the word as incorrect (0%) or press correct on the keyboard to store the word as correct (100%).
When the speech material is indexed according to the number of phonemes in each word, the soft key numbers available for scoring will be active.
E.g. for a word with two phonemes, the soft keys 0, 1 and 2 will become available for scoring. The upper the display in the suites, while the lower displays the buttons on the standalone audiometer.
When the word is scored with the use of phonemes, the number of correct phonemes will appear below the word.
The percentage will be calculated as the numbers of phonemes correct out of the total number of phonemes that has been presented up until the given word.
Thereby the storing can be done at any time during the scoring.
Before performing speech audiometry you may wish to do the tone audiogram. This provides valuable predictive information useful in the speech testing, including information about when masking is needed during speech testing. For more information about masking please refer to the quick guide ‘Audiometric masking’.
The SRT/WR displayed as a table allows for measuring multiple SRTs using different test parameters, e.g. Transducer, Test Type, Intensity, Masking, and Aided together with the SRT or WR score.
When showing the SRT in graph mode the speech audiogram calculates the SRT value based on the norm curve (the distance in dB from the point where the norm curve crosses 50% to the point where the speech curve crosses 50%) like shown below. The result is then an expression of how much you need to turn up the level compared to normal in order for the patient to be able to repeat 50%.
Use the m-curve for multi syllabic words and the s-curve if using single syllabic words. The curves can be edited according to the normative data you wish to use in the speech settings.
Note that the norm curves change based on the speech material. You must therefore ensure that WR1, WR2 or WR3 is linked to single or multisyllabic words to show the SRT. Calculating the WR SRT is only available when using the suite.
When running the speech test using wavefiles, the tester can decide to present manually, continuously or timeout for the speech setup.
Manual mode allows the tester to manually press the Tone Switch/Enter button to present the word and then score it as Incorrect of Correct before moving on to the next word.
In Continuous mode, the next word will automatically be presented after scoring incorrect or correct.
In the Time Out mode, the word played will be scored as either correct or incorrect if no scoring is entered within 1 to 5 seconds.
Problems understanding speech in noise is a common complaint from people with hearing loss. Having the ability to test the patient with speech in noise provides useful information about the impact of the hearing loss on the patient’s ability to communicate. It also provides information about whether the patient is actually getting the expected benefit from the hearing aids when communicating in noisy environments.
Testing the patient in a speech in noise setup can be done using a free field setup either by presenting the speech signal and noise signal from the same speaker or alternatively, separating the speech signal and noise signal by presenting the signal from two different speakers. It can be done by selecting the test speech in noise.
If the intention is to present the speech signal to both ears at the same time, select binaural speech by choosing the test Speech - Ch2on. Note this is only available with the AD629 extended.
Stach, B.A (1998) Clinical Audiology: An introduction, Cengage Learning