The Affinity Suite has pre-defined protocols. Most of these protocols can easily be copied, modified or created from new. These modifications can be either permanent or temporary. How to select a sta…
Enter/Select an audiogram from Noah or from the AUD module. If no audiogram is entered or selected, no targets will be displayed. To enable Binaural REM measurements in the REM module you will need t…
Starting up the AC440 Module Launch the Affinity Suite from Noah or OtoAccess®. Click on the AUD tab on the upper right hand side of the screen. Click on the icon to launch the tone audiometry screen…
Verification of the hearing aid fitting is a very important part of the fitting process. To try to make this process a bit easier, rather than using traditional real-ear measurements, hearing care pr…
NOTE: Hearing instruments need to be in FULL ON GAIN MODE/TEST MODE in order to compare the results to the hearing aid manufacturers’ technical data sheets. Each hearing aid manufacturer has a differ…
How to determine if frequency lowering should be applied 1. Launch Affinity/Callisto Suite. 2. Ensure an audiogram is entered. 3. Navigate to REM module. 4. Fitting prescription setting will automati…
Note: FM transparency assumes that the hearing aid has already been programmed to match the target, according to the patient’s hearing loss. Note: The examples shown below are using the Affinity Comp…
Introduction Ear Level FM systems are intended to be used by patients who have normal or near-normal hearing and help increase the signal to noise ratio. They can be used, for example, in classroom s…
Directionality Test using Real Ear Measurements From your patient management system, Noah or OtoAccess®, launch the Affinity or Suite. Launch the REM440 module by clicking on the REM tab. Prepare the…
The BSA Clinical Practice Guidelines recommend using the NAL-NL1/NAL-NL2 fitting formulae when performing Adult hearing aid verification. The choice between the use of the REIG (insertion gain) or th…
The Affinity 2.0 and Callisto™ software suites all have pre-defined protocols. Most of these protocols can easily be copied, modified or created from new. These modifications can be either permanent…
The Affinity 2.0 and Callisto™ software suites all have pre-defined protocols. Most of these protocols can easily be copied, modified or created from new. These modifications can be either permanent…
