The insert phones (transducer boxes, cables, tubes and adapters) can be wiped down with a damp cloth and a disinfectant wipe after use. Be careful that no fluid enters into the adapters or sensitive…
This video shows you how to set up your test environment prior to performing Aided Cortical testing on the Eclipse. You can read the full transcript below. Transcript When doing aided cortical testin…
The binaural REM feature in Callisto™ Suite will allow you to perform Real Ear Measures in a much faster procedure and allow you to view the activity in each ear simultaneously. Preparation Enter/Sel…
This quick guide is intended to give a brief explanation on how to fit CROS and BiCROS type hearing aids. How to perform CROS 1. Launch Affinity/Callisto Suite. 2. Ensure audiogram is entered. 3. Nav…
Note: FM transparency assumes that the hearing aid has already been programmed to match the target, according to the patient’s hearing loss. Note: The examples shown below are using the Affinity Comp…
Directionality Test using Real Ear Measurements From your patient management system, Noah or OtoAccess®, launch the Callisto™ Suite. Launch the REM440 module by clicking on the REM tab. Prepare the p…
Enter/Select an audiogram from Noah or from the AUD module. If no audiogram is entered or selected, no targets will be displayed. To enable Binaural REM measurements in the REM module you will need t…
NOTE: Hearing instruments need to be in FULL ON GAIN MODE/TEST MODE in order to compare the results to the hearing aid manufacturers’ technical data sheets. Each hearing aid manufacturer has a differ…
Note: FM transparency assumes that the hearing aid has already been programmed to match the target, according to the patient’s hearing loss. Note: The examples shown below are using the Affinity Comp…
This quick guide is intended to give a brief explanation on how to fit CROS and BiCROS type hearing aids. How to perform CROS 1. Launch Affinity/Callisto Suite. 2. Ensure audiogram is entered. 3. Nav…
Test procedure Launch the Equinox Suite from Noah, OtoAccess®, or standalone. Click on the AUD tab on the upper right-hand side of the screen. Ensure that your audiometry has been performed ahead of…
Test procedure Launch the Equinox Suite from Noah, OtoAccess®, or standalone. Click on the AUD tab on the upper right-hand side of the screen. Ensure that your audiometry has been performed ahead of…
