Verification of the hearing aid fitting is a very important part of the fitting process. To try to make this process a bit easier, rather than using traditional real-ear measurements, hearing care pr…
The binaural REM feature in Callisto™ Suite will allow you to perform Real Ear Measures in a much faster procedure and allow you to view the activity in each ear simultaneously. Preparation Enter/Sel…
Jack Bennett, BSc (Hons), International Clinical Trainer from the Interacoustics Academy discusses the physical and environmental factors that effect the quality of measurements achieved when perform…
Enter/Select an audiogram from Noah or from the AUD module. If no audiogram is entered or selected, no targets will be displayed. To enable Binaural REM measurements in the REM module you will need t…
This video demonstrates some suggestions to help when performing real-ear-to-coupler difference (RECD) measurements. You can read the full transcript below. Probe microphone insertion With both REMs…
Jack Bennett, BSc (Hons), International Clinical Trainer from the Interacoustics Academy discuses some alternative methods a clinician can use to verify a hearing aid fitting, when in situ real ear m…
How to determine if frequency lowering should be applied 1. Launch Affinity/Callisto Suite. 2. Ensure an audiogram is entered. 3. Navigate to REM module. 4. Fitting prescription setting will automati…
How to determine if frequency lowering should be applied 1. Launch Affinity/Callisto Suite. 2. Ensure an audiogram is entered. 3. Navigate to REM module. 4. Fitting prescription setting will automati…
How to determine if frequency lowering should be applied 1. Launch Affinity/Callisto Suite. 2. Ensure an audiogram is entered. 3. Navigate to REM module. 4. Fitting prescription setting will automati…
The placement of the probe tube is critical when performing real-ear measurements (REMs), as it serves as your point of reference for all the measurements you’ll perform. A poor placement can be detr…
