More about Affinity 2.0

Product Downloads

Manuals in other languages

Previous Manuals

Affinity 2.0 Support

Welcome to the product training for Affinity 2.0. On this page you will find an overview of all the available training materials and support.

Binaural Real Ear Measurements

The purpose of this article is to provide a quick guide for the Binaural REM feature found in the REM440 Real-Ear Measurement module in the Affinity Suite. ...

FM Transparency Verification

Customized Printout Setup

This Quick Guide is intended to give a brief introduction on how to create and configure custom print layouts in the Affinity2.0 and Callisto™ software suite...

Verifying Ear Level FM Systems

How to Verify Directional Hearing Aids

AC440 Protocol Setup

Print Reports

Hearing Instrument Testing

The purpose of this Quick Guide is to provide guidelines on how to conduct basic technical measurements of hearing instruments using the HIT440 module for th...

Real-Ear-to-Coupler Difference

QuickSIN Test

Basic Audiometry

The purpose of this document is to provide a quick guide for basic functions of the AC440 Audiometry modules for the Affinity Suite. This quick guide will fo...

TEN Test in AC440

How to Use the SKS10 Skull Simulator

Adult Hearing Aid Verification

The purpose of this article is to provide a quick guide for the REM procedure stated by the British Society of Audiology (BSA) for the REM440 Real-Ear Measur...

REM440 Protocol Setup

Visible Speech Mapping

Speech in Quiet (SIQ) Test

Speech in Noise (SIN) Test

CROS and BiCROS Fitting

This quick guide is intended to give a brief explanation on how to fit CROS and BiCROS type hearing aids. The instructions in this guide have been adapted fr...

Acceptable Noise Level (ANL) Test

Keyboard Shortcuts

HIT440 Test Protocol

Learn how to work with, create or edit protocols in the Affinity 2.0 and Callisto™ software suites.

REM440 Test Protocol

Learn how to work with, create or edit protocols in the Affinity 2.0 and Callisto™ software suites.

Customised Printout Setup

Learn how to create and configure custom print layouts in the Affinity 2.0 and Callisto™ software suites.

Delta Values

How to customize icons

How to modify fitting prescriptions

How to do Pure Tone Audiometry

Welcome to this video which demonstrates how to perform Pure Tone Audiometry on the Affinity, Equinox and Callisto™.

The Benefits of Visible Speech Mapping

In this video, we explain the benefits of using visible speech mapping in the clinic.

Introduction to the SKS10 Skull Simulator

REM - Percentile analysis v2

REM - VSPM display screen part 1

REM - VSPM display screen part 2

How to do Real Ear Measurement in Open Fit Hearing Aids

REM: Probe Tube Insertion

This video shows how to insert a REM probe tube into an ear.

REM: Probe Tube Calibration

This video provides an overview of how to perform a probe tube calibration and interpret the results.

How to do an RECD Using the SPL60 Probe

This video shows how to measure the real ear to coupler difference (RECD) using the SPL60 probe.

How to Perform an RECD Using an Ear Mould

This video shows how to perform a real ear to coupler difference (RECD) measurement using an ear mould.

How to import and export a REM protocol

How to Create a New Protocol in REM440

Looking for clinical training?

Are you looking for more advanced and clinical training?

Visit the Interacoustics Academy

Copyright © Interacoustics A/S. All rights reserved.