OAEs can be utilized to investigate types and causes of hearing loss. OAEs can be analyzed over a wider range of frequencies and thereby enable a more extensive look at cochlea function. Clinical OAE is particularly beneficial for patients suffering from tinnitus or ototoxic-induced hearing loss or patients exposed to occupational noise.
We have gathered everything you need to know about OAE in an extensive guide.
One application for diagnostic otoacoustic emissions is in the use of ototoxicity monitoring. Monitoring protocols aim to assist in the identification of ototoxicity which can then inform dose changes, adjustments to treatment plans, and early rehabilitation to mitigate the effects of ototoxicity. Of the evoked family of otoacoustic emissions, distortion product OAEs (DPOAEs) lend themselves better to ototoxicity monitoring than transient evoked OAEs (TEOAEs).
The first tympanometers in the 1950s were not able to compensate for negative middle ear pressure. This is no longer the case. Today, compensating for a negative middle ear pressure is the clinical standard in all tympanometers. Imagine if this was the case with your OAE device? Interacoustics’ pressurized OAE compensates for the shift in peak compliance, allowing you to perform pressurized DPOAE and TEOAE despite of negative middle ear pressure.
In fact, studies show a remarkable improvement in the amplitude of pressurized OAE at frequencies below 2 kHz. Particularly children with negative ear pressure can obtain a full and reliable measurement even though they may have small amounts of fluid in their ear.
Interacoustics has several experts within OAE. In a constant effort to improve testing methods and to secure reliable test results, our experts are deeply engaged with advanced engineering and complex algorithms.
One of our experts is Peter Bray, a pioneer in newborn screening and clinical OAE.
What is weighted averaging and how can it help reduce the test time in OAE measurements?
In this white paper, OAE Specialist and PhD in Biophysics, Peter Bray discusses the mechanism of weighted averaging and in what circumstances it improves OAE measurements.