Looking for help?

Visit the Support Center for additional downloads.
Download and run TeamViewer for technical live assistance.

Switching the Probe Tip AT235/AA222

The busy professional quick switch ...switch now and clean later...

Diagnostic probe   Clinical probe

Step 1: Unscrew the probe cap and remove the probe tip.

 

Step 1: Unscrew the probe cap and remove the probe tip.

Step 2: Make sure there is a gasket in the clean probe tip.

 

Step 2: Make sure there is a gasket in the clean probe tip.

Step 3: Replace with the clean replacement tip.

 

Step 3: Replace with the clean replacement tip.

Step 4: Assemble the probe again.

 

Step 4: Assemble the probe again.

 


Notice
:

Clean the probe tip regularly: To avoid earwax clogging the tubes of the probe tip and affecting measurements with your AT235/AA222, it is recommended to clean the probe tip regularly.

Complimentary probe tip enclosed: As Interacoustics acknowledges that clinicians often have a busy workday, please find a complimentary probe tip enclosed with your AT235/AA222.

Easily swap the probe tip: Easily swap the probe tip during the day, and clean it when the patients are out of the clinic.

Please follow the steps 1 to 4 when you remove the probe tip and replace it with a new, clean one.

January 2017
Want to know more about our products or arrange a demonstration? Contact an Interacoustics sales office, call +45-6371-3555, or find a distributor.
Features and/or functions may not be available for all countries or all areas and product specifications are subject to change without prior notification.
Copyright © 2020 Interacoustics A/S. All rights reserved. Privacy policy