Looking for help?

Visit the Support Center for additional downloads.
Download and run TeamViewer for technical live assistance.

Installation

The following Quick Guide has been created to assist with pairing the Interacoustics Titan to your Windows XP PC/laptop using Bluetooth.

Turn on the Titan Handheld Unit (HHU) and your Windows XP PC/laptop:

  1. Select Protocol | My Titan |Titan and change Bluetooth Connection to PC, by pressing the R or L button.

  2. Go to START | Control Panel and double click on the Bluetooth Icon:

  3. Click on Add. At the Welcome screen, press Next.

  4. Wait while the Wizard searches for your device. Select the Titan and click Next.

  5. Select Use the passkey found in the documentation and enter 1234. Click Next. The Titan and your PC are now connected via Bluetooth. Click Finish.

    To confirm the Bluetooth pairing, Start up the Titan Suite from OtoAccess, Noah or in Standalone mode (see the Titan Instructions for Use for further instruction). Ensure that the Titan is still switched on.

  6. Allow the Bluetooth device to search for the Titan. After a short while, your Titan with corresponding identification number will appear in the window below.

  7.  Click on “Titan xxxxxx” and wait a few seconds to allow it to connect.

  8.  On connection, the Suite will finish launching and the Titan HHU screen will show “PC-controlled”. Now the Titan can be operated from PC in the same way as if it was connected via a USB cable.

Note: If the Titan will not connect correctly and your PC has its manufacturer’s Bluetooth Driver installed, you may need to uninstall this and then try re-pairing the Titan with your PC.

November 2013

The following Quick Guide has been created to assist with pairing the Interacoustics Titan to your Windows® 8 or 10 PC/laptop using Bluetooth.

Turn on the Titan Handheld Unit (HHU) and your Windows® 8 or 10 PC/laptop:

  1. Select Protocol | My Titan |Titan and change Bluetooth Connection to PC, by pressing the R or L button.
  2. From the task bar, right click on the Bluetooth Icon and select Add a Bluetooth Device
    .

  3. When the screen below appears, select the Titan for pairing and then click Pair. Enter the pairing code (1234) and click Next.


  4. The Titan is now paired to your PC via Bluetooth. Close the dialog box.


  5. To confirm the Bluetooth pairing, Start up the Titan Suite from OtoAccessTM, Noah or in Standalone mode (see the Titan Additional Information Manual for further instructions). Ensure that the Titan is still switched on.

  6. Allow the Bluetooth device to search for the Titan. After a short while, your Titan with a corresponding identification number will appear in the window below.
  7. Click on “Titan xxxxxx” and wait a few seconds to allow it to connect.

  8. On connection, the Suite will finish launching and the Titan HHU screen will show “PC-controlled”. Now the Titan can be operated from PC in the same way as if it was connected via a USB cable.

Note: If the Titan will not connect correctly and your PC has its manufacturer’s Bluetooth Driver installed, you may need to uninstall this and then try re-pairing the Titan with your PC.

September 2015

The following Quick Guide has been created to assist with pairing the Interacoustics Titan to your Windows® 7 PC/laptop using Bluetooth.

 Turn on the Titan Handheld Unit (HHU) and your Windows® 7 PC/laptop:

  1. Select Protocol | My Titan |Titan and change Bluetooth Connection to PC, by pressing the R or L button.


  2. From the task bar, right click on the Bluetooth Icon and select Add Device.


  3. When the screen below appears, select the Titan for pairing and then click Next. Enter the pairing code (1234) and click Next.
  4. The Titan and you PC are now connected via Bluetooth. Click Close.
  5. To confirm the Bluetooth pairing, Start up the Titan Suite from OtoAccessTM, Noah or in Standalone mode (see the Titan Additional Information Manual for further instructions). Ensure that the Titan is still switched on.

  6. Allow the Bluetooth device to search for the Titan. After a short while, your Titan with a corresponding identification number will appear in the window below.
  7. Click on “Titan xxxxxx” and wait a few seconds to allow it to connect.

  8. On connection, the Suite will finish launching and the Titan HHU screen will show “PC-controlled”. Now the Titan can be operated from PC in the same way as if it was connected via a USB cable.

Note: If the Titan will not connect correctly and your PC has its manufacturer’s Bluetooth Driver installed, you may need to uninstall this and then try re-pairing the Titan with your PC.

September 2015
Want to know more about our products or arrange a demonstration? Contact an Interacoustics sales office, call +45-6371-3555, or find a distributor.
Features and/or functions may not be available for all countries or all areas and product specifications are subject to change without prior notification.
Copyright © 2020 Interacoustics A/S. All rights reserved. Privacy policy