Technical Specifications
Size and weight
- Length: 8.9 inches (22.5 cm)
- Width: 7.1 inches (18 cm)
- Height: 2.2 inches (5.5 cm)
- Weight: 2.2 pounds (1 kg) incl. batteries and headset
Audiometer Standards
- Conforms to IEC 60645-1 Type 4 ANSI s3.6 Type 4.
Frequencies and intensities
- 11 frequencies 125Hz to 8kHz, -10 dB (minus 10dB HL) to 100 dB output
Increments
- 5 dB
Frequency deselection
- The following frequencies can be deselected in the setup: 125, 250, 500, 750, 1500, 2000, 3000, 4000, 6000, 8000Hz.
Input
- Tone, warble tone ±5%, 5Hz (true sine wave frequency modulation).
Output
- Left and right earphone
Tone presentation
- Manual, Reverse, Pulse (250 or 500 msec.)
Distortion
- 0,3 % typical at full intensity, 1% maximum at full intensity
Rise/fall times
- 35 msec. typical
Display size
- Lenght: 1.9 inches (4.8 cm)
- Width: 1.8 inches (4.5 cm)
Powering the instrument
- 3 pieces AA in the cabinet
- external power supply
- USB cable to PC
Battery conditions
- Automatic battery status indication on display. Automatic battery on/off switching.
- Battery life: Standby: 6 months.
- Tone presentations: 70.000
External power supply
- 5 Volts DC (– minimum 150 mA.)
Construction
- Plastic cabinet
Included parts
- DD45 Audiometric Headset
- 200 AF12 Audiogram Charts
- TC608 Carrying Bag
- Pen set, 3 pens
- Operation Manual
- Multilingual CE - instructions for use
Only AS608e
- APS3 Patient Signal Button
- Diagnostic Suite PC software
- Standard USB Cable
Optional parts
- ASA30M External Power Supply
- Medical CE Approved (incl. in the US)
- APS3 Patient Signal Button
- 21925 Audio cup Noise Excluders
- 50250 Peltor Noise Excluders
AS608e only
Store function key:
Internal memory for AC L/R
Tests:
Hughson Westlake automatic pure tone test procedure
Windows® Software:
Diagnostic Suite for PC-integration (OtoAccess™ and NOAH compatible)

Computer Integration
| General computer requirements |
|
| Display requirements |
|
| Software requirements |
|
Additional service and support
To find additional support please call us or go to our technical support center
